Peopleperson49 Posted March 31, 2012 Posted March 31, 2012 Can anybody point me to a working upto date client with the proper LUA files? If somebody can make one for me that would be super, since I have litterally been trying all day using the Diff Patcher. If you can let me know. Peopleperson49 RoUG.exe Ragnarok Underground (RoUG) RoUG.ini Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 Miruku's Client http://rathena.org/board/topic/54426-miruku-15122011/ Clients data files http://rathena.org/board/topic/54190-release-basic-rathena-client/ P.S. Not sure what your going on about at the end ^_~ Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 When you diff a client you need that information. I have a running server, I have everything every guide says I need. I have working grf files. But for some reason I can't get a client that works properly. Once client wont display any skill info. Another client gets another error. Just one never ending error after another. Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 You need matching data and lua files with your client. Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 I have downloaded the 7z client and data package, however, even that is bugged. The optioninfo and chatwindinfo gives me errors. Is there not one good one out there? Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 You must be doing something wrong... Please revert back to the basics http://rathena.org/wiki/Main_Page and http://supportmii.com/ro1/JudasBible.pdf Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 I have went over the guide. I put the data files in my grf and repacked. Then put the client in the folder. I can load my server and login. Everything works fine until I try to swich characters or log out. then I get two errors: ChatWndInfo_U and OptionInfo. Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 ah yeah lol, you can't pack all the files in a GRF. Some LUA files are used by the client/user to write their settings. Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 I put the EOT files in the data folder itself. Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 Here's a basic data folder w/ everything else in a GRF. Quote
Judas Posted March 31, 2012 Posted March 31, 2012 If you want head over to my boards and post under client support with conplete details and ill help you out personally. My ra inbox is full and not really up to deleting it all. Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 That screenshot you showed me. Those two files there at the end are exact two that are erroring. I see that I need them now. However, I just double checked and they are not included in what I downloaded. Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 (edited) Try running the client in "Administrator Mode". Sounds like your client isn't writing the files. Edited March 31, 2012 by Matrixfox Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 Where does Judas want me to go? I though this was client support? How do I run it in admin mode? Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 supportmii.com/board/ Simple, right mouse click on your client.exe. Select "Run as administrator". Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 Nice, did not get that error when I ran as admin. How do I get it to allow that all the time? Peopleperson49 Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 I hate to sound like a complete noob but whats UAC? Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 (edited) Lols Windows remake of BlackICE, go to "Start", "Run", type "UAC" and slide the bar all the way down and restart. Edited March 31, 2012 by Matrixfox Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 A couple other questions since you seem to know a lot about this client. Am I able to adjust the screen size with this client? How do I diff it so that I can make it my server name, read my file.ini, and call it myserver.exe? Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 Yeah you need a setup.exe that works. http://svn6.assembla.com/svn/ClientSide/Diff_Project/HKCU_Setup/ Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 I must have slipped on the BlackICE. It told me: Windows cannot find 'UAC'. Make sure you typed the name correctly, and then try again. Peopleperson49 Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 Control Panel > Search "UAC" > Change User Account Control settings > Slide the bar down, restart. Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 Which setup do I use? Whats it talking about? Setup_HKLM_to_HKCU.diff : This diff is for Setup.exe when you have patched you Ragnarok Executable with [Fix]_HKLM_to_HKCU diff. You can use it with k3dt's patcher. Setup.Exe : Original Setup.exe file. Setup_patched.exe : Setup.Exe patched with HKLM_to_HKCU diff. Quote
Matrixfox Posted March 31, 2012 Posted March 31, 2012 I just use the setup.exe, I've used the patched one too, both works... The setup.exe with HKLM_to_HKCU needs the hex diff with your client. Quote
Peopleperson49 Posted March 31, 2012 Author Posted March 31, 2012 Are you talking about Control Panel/User Accounts? Peopleperson49 Quote
Question
Peopleperson49
Can anybody point me to a working upto date client with the proper LUA files? If somebody can make one for me that would be super, since I have litterally been trying all day using the Diff Patcher. If you can let me know.
Peopleperson49
RoUG.exe
Ragnarok Underground (RoUG)
RoUG.ini
43 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.