close connection from 127.0.0.1

[Diss]

hi guys can anyone guide me in this problem ..

 

how can i fix this can you give step by step intruction 

 

thanks in advance

[Jaburak]

May I know what IP did you set in your char_athena.conf and map_athena.conf?

[Diss]

10.210.147.73 i got it from whatismyip.org

[Jaburak]

That might be wrong, because sometimes http://whatismyip.org/ gives wrong IP. Try checkin your IP here; http://www.whatismyip.com/

[Diss]

iyea i got one from http://www.whatismyip.com/ but nothing happened 

 

hmm i have seen problem like this in other thread they say need to change the login_ip, its right but how,where  ?

[Jaburak]

Can you check if you set up your ip correctly in char_athena.conf and map_athena.conf?

[Diss]

it look like this 

 

char_athena.conf

 

 

// Wisp name for server: used to send wisp from server to players (between 4 to 23 characters)

wisp_server_name: Server

// Login Server IP

// The character server connects to the login server using this IP address.

// NOTE: This is useful when you are running behind a firewall or are on

// a machine with multiple interfaces.

login_ip: 127.0.0.1

 

// The character server listens on the interface with this IP address.

// NOTE: This allows you to run multiple servers on multiple interfaces

// while using the same ports for each server.

//bind_ip: 127.0.0.1

 

// Login Server Port

login_port: 6900

 

// Character Server IP

// The IP address which clients will use to connect.

// Set this to what your server's public IP address is.

char_ip: 222.127.85.18

 

// Character Server Port

char_port: 6121

 

 

map_athena.conf

 

// Character Server IP

// The map server connects to the character server using this IP address.

// NOTE: This is useful when you are running behind a firewall or are on

// a machine with multiple interfaces.

char_ip: 127.0.0.1

 

// The map server listens on the interface with this IP address.

// NOTE: This allows you to run multiple servers on multiple interfaces

// while using the same ports for each server.

//bind_ip: 127.0.0.1

 

// Character Server Port

char_port: 6121

 

// Map Server IP

// The IP address which clients will use to connect.

// Set this to what your server's public IP address is.

map_ip: 222.127.85.18

 

// Map Server Port

map_port: 5121

[Jaburak]

Put your IP in;

login_ip
char_ip
map_ip

[Diss]

when i put IP in login_ip i got this error

 

// Wisp name for server: used to send wisp from server to players (between 4 to 23 characters)

wisp_server_name: Server

// Login Server IP

// The character server connects to the login server using this IP address.

// NOTE: This is useful when you are running behind a firewall or are on

// a machine with multiple interfaces.

login_ip: 222.172.85.18

 

[michaelsoftman]

When I run a server locally, I use 127.0.0.1 for all of the addresses.

 

But you may want to check if those ports on your computer are open for inbound connections.

[Diss]

When I run a server locally, I use 127.0.0.1 for all of the addresses.

 

But you may want to check if those ports on your computer are open for inbound connections.

 

can you guide me sir how to do that

[michaelsoftman]

It depends on the type of router you have.  Just google the router name and port forwarding.  The steps are different for a lot of them.

[Diss]

It depends on the type of router you have.  Just google the router name and port forwarding.  The steps are different for a lot of them.

 

 

oh i've done with it .. can you check it 

 

i made like this

 

Edited May 8, 2013 by Diss

[michaelsoftman]

That should be fine, did you test the server out?

[Yudax]

Try to change your 127.0.0.1 to your LAN - IP.

[Diss]

Try to change your 127.0.0.1 to your LAN - IP.

 on what part in char_athena map_athena should i need to edit clieninfo.xml ?

[Yudax]

login_ip:

 

Try to change your 127.0.0.1 to your LAN - IP.

 on what part in char_athena map_athena should i need to edit clieninfo.xml ?

[Diss]

when i try to change the login_ip in conf/char_athena.conf its give e error on charserv-sql.bat look at post # 9

Edited May 8, 2013 by Diss