Equi Posted January 3, 2019 Group: Members Topic Count: 1 Topics Per Day: 0.00 Content Count: 4 Reputation: 0 Joined: 01/03/19 Last Seen: March 8, 2019 Share Posted January 3, 2019 (edited) Moin all, ich versuch seit Tagen meinen Ro-Server + Client zum laufen zu bekommen, durch diesen Link https://rathena.org/board/topic/111830-tutorial-video-edition-how-to-setup-rathena-and-run-ragnarok-updated-2018-7-28/ hatte ich eine gute Anleitung und hab damit auch den Server online bekommen, nun scheitert es leider am Client glaube ich?! egal was ich an Hilfe aus dem Forum versucht habe, ich finde meinen Fehler einfach nicht und hoffe nun einer kann mir helfen. Es scheint wohl ein typischer "closed connection from" Fehler zu sein, getestet hab ich die Verbindung mit der Client Anleitungs aus dem Link, die ging nicht. 3 neue Client Versionen 20180530b, 20151104a, 20170614b auch das brachte nichts soweit die Charakterauswahl kommen soll bekomm ich einen DC. Char_conf login_ip: 127.0.0.1 char_ip: public ip server_name: Loki Map_conf char_ip: 127.0.0.1 map_ip: public ip src/config/packets.hpp Spoiler ifndef CONFIG_PACKETS_HPP #define CONFIG_PACKETS_HPP /** * rAthena configuration file (http://rathena.org) * For detailed guidance on these check http://rathena.org/wiki/SRC/config/ **/ #ifndef PACKETVER /// Do NOT edit this line! To set your client version, please do this instead: /// In Windows: Add this line in your src\custom\defines_pre.hpp file: #define PACKETVER YYYYMMDD /// In Linux: The same as above or run the following command: ./configure --enable-packetver=YYYYMMDD #define PACKETVER 20151104 #endif #ifndef PACKETVER_RE /// From November 2015 only RagexeRE are supported. /// After July 2018 only Ragexe are supported. #if PACKETVER > 20151104 #define PACKETVER_RE #endif #endif #if PACKETVER >= 20110817 /// Comment to disable the official packet obfuscation support. /// This requires PACKETVER 2011-08-17 or newer. #ifndef PACKET_OBFUSCATION #define PACKET_OBFUSCATION // Define these inside src/custom/defines_pre.hpp or src/custom/defines_post.hpp //#define PACKET_OBFUSCATION_KEY1 <key1> //#define PACKET_OBFUSCATION_KEY2 <key2> //#define PACKET_OBFUSCATION_KEY3 <key3> /// Comment this to disable warnings for missing client side encryption #define PACKET_OBFUSCATION_WARN #endif #else #if defined(PACKET_OBFUSCATION) #error You enabled packet obfuscation for a version which is too old. Minimum supported client is 2011-08-17. #endif #endif /// Comment to disable the official Guild Storage skill. /// When enabled, this will set the guild storage size to the level of the skill * 100. #if PACKETVER >= 20131223 #define OFFICIAL_GUILD_STORAGE #endif #ifndef DUMP_UNKNOWN_PACKET //#define DUMP_UNKNOWN_PACKET #endif #ifndef DUMP_INVALID_PACKET //#define DUMP_INVALID_PACKET #endif /** * No settings past this point **/ /// Check if the specified packetversion supports the pincode system #define PACKETVER_SUPPORTS_PINCODE PACKETVER >= 20110309 /// Check if the client needs delete_date as remaining time and not the actual delete_date (actually it was tested for clients since 2013) #define PACKETVER_CHAR_DELETEDATE (PACKETVER > 20130000 && PACKETVER <= 20141022) || PACKETVER >= 20150513 /// Check if the specified packetvresion supports the cashshop sale system #define PACKETVER_SUPPORTS_SALES PACKETVER >= 20131223 #endif /* CONFIG_PACKETS_HPP */ Bin für jeden Vorschlag offen. Schonmal vielen Dank an euch alle. @edit: Sorry fall es unter Server geladet ist aber ich weis nicht ob es nun wirklich nur der Client ist oder vielleicht doch ein Fehler beim Server aufsetzen. Jede Änderung am Server wurde mit MVS17 gemacht also gesäubert und neu erstellt bei jedem Versuch. Edited January 3, 2019 by Equi Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 3, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 3, 2019 Was sagt der Char-Server? Glaub closed connection ist normal nachdem der Client an den char-Server weiter geleitet wurde (nicht 100% sicher aber glaub das war so) Quote Link to comment Share on other sites More sharing options...
Shyl Posted January 4, 2019 Group: Members Topic Count: 0 Topics Per Day: 0 Content Count: 6 Reputation: 0 Joined: 08/28/14 Last Seen: May 19, 2021 Share Posted January 4, 2019 Hi, habe exakt das selbe Problem. Der Char Server startet normal und sagt garnichts. Ports sind aufjedenfall offen. Frohes neues Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 4, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 4, 2019 @Shyl Irgendwas müsste der Char-Server eigentlich ausspucken, ansonsten könnte es sein, dass deine configs falsch sind. Der Client connectet über die IP, die er in der Clientinfo findet zum Login-Server. Der Login server macht dann sein Ding und sagt dem Client anschließend über welche IP( und Port) er den Char-Server erreichen kann. Wenn der Client vom Login server nun falsche informationen bekommt, connectet niemand zum Char-Server und deswegen wsl auch kein Output beim char-server. Nur `ne Idee, könnte auch was anderes sein, aber guck am besten nochmal über deine Config rüber. Mit wireshark (https://www.wireshark.org/) kannst du auch mal checken wohin der client tatsächlich connectet, dann kannst du ausschließen, dass es ein problem mit flaschen Konfig-Einstellung ist. Quote Link to comment Share on other sites More sharing options...
Shyl Posted January 4, 2019 Group: Members Topic Count: 0 Topics Per Day: 0 Content Count: 6 Reputation: 0 Joined: 08/28/14 Last Seen: May 19, 2021 Share Posted January 4, 2019 Spoiler [Status]: Memory manager initialised: log/char-server.exe.leaks rAthena Development Team presents ___ __ __ _____/ | / /_/ /_ ___ ____ ____ _ / ___/ /| |/ __/ __ \/ _ \/ __ \/ __ `/ / / / ___ / /_/ / / / __/ / / / /_/ / /_/ /_/ |_\__/_/ /_/\___/_/ /_/\__,_/ http://rathena.org/board/ [Info]: Git Hash: '46138645f66d6c3d4f04e2677f0fc4434600252f' [Info]: Server uses 'select' as event dispatcher [Info]: Server supports up to '4096' concurrent connections. [Status]: Login server IP address : -> [Status]: Character server IP address : -> [Info]: Done reading conf/import/char_conf.txt. [Info]: Done reading conf/char_athena.conf. [Info]: Done reading conf/import/inter_conf.txt. [Info]: Done reading conf/inter_athena.conf. [Info]: Done reading '149' messages in 'conf/msg_conf/char_msg.conf'. [Info]: Done reading conf/import/inter_conf.txt. [Info]: Done reading conf/inter_athena.conf. [Info]: Connect Character DB server.... (Character Server) [Status]: Done reading '1' storage information in 'conf/inter_server.yml' [Status]: Done reading '0' storage information in 'conf/import/inter_server.yml' [Status]: Done reading '50' entries in 'db/re/exp_guild.txt'. [Status]: Done reading '0' entries in 'db/import/exp_guild.txt'. [Info]: Clan loaded (1 - Swordman Clan) [Info]: Clan loaded (2 - Arcwand Clan) [Info]: Clan loaded (3 - Golden Mace Clan) [Info]: Clan loaded (4 - Crossbow Clan) [Status]: Finished Reading GeoIP Database. [Status]: Characters per Account: '0'. [Info]: Start checking DB integrity [Info]: DB integrity check finished with success [Info]: Default map: 'prontera 156,191' [Status]: The char-server is ready (Server is listening on the port 6121). [Info]: Attempt to connect to login-server... [Status]: Connecting to [Status]: Connected to login-server (connection #2). [Status]: Awaiting maps from map-server. [Status]: Map-Server 0 connected: 995 maps, from IP port 5121. [Status]: Map-server 0 loading complete. [Info]: Loaded guild castle (0 - guild 0) [Info]: Loaded guild castle (1 - guild 0) [Info]: Loaded guild castle (2 - guild 0) [Info]: Loaded guild castle (3 - guild 0) [Info]: Loaded guild castle (4 - guild 0) [Info]: Loaded guild castle (5 - guild 0) [Info]: Loaded guild castle (6 - guild 0) [Info]: Loaded guild castle (7 - guild 0) [Info]: Loaded guild castle (8 - guild 0) [Info]: Loaded guild castle (9 - guild 0) [Info]: Loaded guild castle (10 - guild 0) [Info]: Loaded guild castle (11 - guild 0) [Info]: Loaded guild castle (12 - guild 0) [Info]: Loaded guild castle (13 - guild 0) [Info]: Loaded guild castle (14 - guild 0) [Info]: Loaded guild castle (15 - guild 0) [Info]: Loaded guild castle (16 - guild 0) [Info]: Loaded guild castle (17 - guild 0) [Info]: Loaded guild castle (18 - guild 0) [Info]: Loaded guild castle (19 - guild 0) [Info]: Loaded guild castle (20 - guild 0) [Info]: Loaded guild castle (21 - guild 0) [Info]: Loaded guild castle (22 - guild 0) [Info]: Loaded guild castle (23 - guild 0) [Info]: Loaded guild castle (24 - guild 0) [Info]: Loaded guild castle (25 - guild 0) [Info]: Loaded guild castle (26 - guild 0) [Info]: Loaded guild castle (27 - guild 0) [Info]: Loaded guild castle (28 - guild 0) [Info]: Loaded guild castle (29 - guild 0) [Info]: Loaded guild castle (30 - guild 0) [Info]: Loaded guild castle (31 - guild 0) [Info]: Loaded guild castle (32 - guild 0) [Info]: Loaded guild castle (33 - guild 0) [Info]: Loaded guild castle (34 - guild 0) [Info]: Loaded guild castle (35 - guild 0) [Info]: Loaded guild castle (36 - guild 0) [Info]: Loaded guild castle (37 - guild 0) [Info]: Loaded guild castle (38 - guild 0) [Info]: Loaded guild castle (39 - guild 0) [Info]: Loaded guild castle (40 - guild 0) [Info]: Loaded guild castle (41 - guild 0) [Info]: Loaded guild castle (42 - guild 0) [Info]: Loaded guild castle (43 - guild 0) Spoiler [Status]: Memory manager initialised: log/login-server.exe.leaks rAthena Development Team presents ___ __ __ _____/ | / /_/ /_ ___ ____ ____ _ / ___/ /| |/ __/ __ \/ _ \/ __ \/ __ `/ / / / ___ / /_/ / / / __/ / / / /_/ / /_/ /_/ |_\__/_/ /_/\___/_/ /_/\__,_/ http://rathena.org/board/ [Info]: Git Hash: '46138645f66d6c3d4f04e2677f0fc4434600252f' [Info]: Server uses 'select' as event dispatcher [Info]: Server supports up to '4096' concurrent connections. [Info]: Finished reading conf/import/inter_conf.txt. [Info]: Finished reading conf/inter_athena.conf. [Info]: Finished reading conf/import/login_conf.txt. [Info]: Finished reading conf/login_athena.conf. [Info]: Done reading '23' messages in 'conf/msg_conf/login_msg.conf'. [Info]: Ipban connection made. [Status]: The login-server is ready (Server is listening on the port 6900). [Info]: Connection request of the char-server 'rAthena' @ ^:6121 (account: 'username', ip: '') [Notice]: Authentication accepted (account: username, id: 1, ip: ) [Status]: Connection of the char-server 'rAthena' accepted. [Status]: Request for connection of Testitest (ip: ) [Notice]: Authentication accepted (account: Testitest, id: 2000000, ip: ) [Status]: Connection of the account 'Testitest' accepted. [Info]: Closed connection from ''. [Status]: Request for connection of Testitest (ip: ) [Notice]: Authentication accepted (account: Testitest, id: 2000000, ip: ) [Status]: Connection of the account Testitest' accepted. [Info]: Closed connection from ''. [Status]: Request for connection of Testitest (ip: ) [Notice]: Authentication accepted (account: Testitest, id: 2000000, ip: ) [Status]: Connection of the account 'Testitest' accepted. [Info]: Closed connection from ''. [Status]: Request for connection of Testitest (ip: ) [Notice]: Authentication accepted (account:Testitest, id: 2000000, ip: ) [Status]: Connection of the account 'Testitest' accepted. [Info]: Closed connection from ''. [Status]: Request for connection of Testitest (ip: ) [Notice]: Authentication accepted (account: Testitest, id: 2000000, ip: ) [Status]: Connection of the account 'Testitest' accepted. [Info]: Closed connection from ''. So hier mal die Logs, die Verbindung zum Login Server wird aufgebaut aber keine zum Char Server. Wireshark spuckt selbes aus. Ich lege mich nun ins Bettchen wenn ich ausgeschlafen bin schaue ich mir nochmal alles genauer an. Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 4, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 4, 2019 Was genau spuckt wireshark denn aus? Connectet der Client zu CharIP:CharPort? Quote Link to comment Share on other sites More sharing options...
Shyl Posted January 4, 2019 Group: Members Topic Count: 0 Topics Per Day: 0 Content Count: 6 Reputation: 0 Joined: 08/28/14 Last Seen: May 19, 2021 Share Posted January 4, 2019 Habe das Problem gelöst, Es lag an der falschen Packetver. Der Client sollte PACKETVER 20151104 haben hat aber PACKETVER 20151102, so sieht es nun bei mir aus. Spoiler #ifndef PACKETVER /// Do NOT edit this line! To set your client version, please do this instead: /// In Windows: Add this line in your src\custom\defines_pre.hpp file: #define PACKETVER YYYYMMDD /// In Linux: The same as above or run the following command: ./configure --enable-packetver=YYYYMMDD #define PACKETVER 20180620 #define PACKETVER 20151102 #define PACKETVER 20151104 #endif Dann habe ich nurnoch die Projektmappe neu erstellt und Viola. So nun kann ich glücklich einschlafen :). Quote Link to comment Share on other sites More sharing options...
Everade Posted January 4, 2019 Group: Members Topic Count: 19 Topics Per Day: 0.00 Content Count: 192 Reputation: 43 Joined: 12/13/11 Last Seen: April 9, 2023 Share Posted January 4, 2019 (edited) Also die ersten 2 könntest du commenten. Weil du überschreibst die Einstellung momentan einfach 2 mal hintereinander. #ifndef PACKETVER /// Do NOT edit this line! To set your client version, please do this instead: /// In Windows: Add this line in your src\custom\defines_pre.hpp file: #define PACKETVER YYYYMMDD /// In Linux: The same as above or run the following command: ./configure --enable-packetver=YYYYMMDD //#define PACKETVER 20180620 //#define PACKETVER 20151102 #define PACKETVER 20151104 #endif Edited January 4, 2019 by Everade Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 4, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 4, 2019 (edited) 3 hours ago, Everade said: Also die ersten 2 könntest du commenten. Weil du überschreibst die Einstellung momentan einfach 2 mal hintereinander. #ifndef PACKETVER /// Do NOT edit this line! To set your client version, please do this instead: /// In Windows: Add this line in your src\custom\defines_pre.hpp file: #define PACKETVER YYYYMMDD /// In Linux: The same as above or run the following command: ./configure --enable-packetver=YYYYMMDD //#define PACKETVER 20180620 //#define PACKETVER 20151102 #define PACKETVER 20151104 #endif Eig wäre es am aller besten, es so zu machen wie es im Kommentar steht und das file gar nicht zu editieren. Edited January 4, 2019 by Normynator 1 Quote Link to comment Share on other sites More sharing options...
Everade Posted January 4, 2019 Group: Members Topic Count: 19 Topics Per Day: 0.00 Content Count: 192 Reputation: 43 Joined: 12/13/11 Last Seen: April 9, 2023 Share Posted January 4, 2019 Ja lesen können ist meistens hilfreich 1 Quote Link to comment Share on other sites More sharing options...
Equi Posted January 4, 2019 Group: Members Topic Count: 1 Topics Per Day: 0.00 Content Count: 4 Reputation: 0 Joined: 01/03/19 Last Seen: March 8, 2019 Author Share Posted January 4, 2019 (edited) 12 hours ago, Shyl said: Habe das Problem gelöst, Es lag an der falschen Packetver. Der Client sollte PACKETVER 20151104 haben hat aber PACKETVER 20151102, so sieht es nun bei mir aus. Hide contents #ifndef PACKETVER /// Do NOT edit this line! To set your client version, please do this instead: /// In Windows: Add this line in your src\custom\defines_pre.hpp file: #define PACKETVER YYYYMMDD /// In Linux: The same as above or run the following command: ./configure --enable-packetver=YYYYMMDD #define PACKETVER 20180620 #define PACKETVER 20151102 #define PACKETVER 20151104 #endif Dann habe ich nurnoch die Projektmappe neu erstellt und Viola. So nun kann ich glücklich einschlafen :). Moin, das mit dem Unterschied wenn man die exe in Nemo läd ist wohl bei allen exen so, zumindest alle die ich geladen haben sind abweichend, hast du jetzt eine unpatch 20151102 exe? hab es gemacht wie es da steht also src\custom\defines_pre.hpp und dort #define PACKETVER 20151104 = keine Verbesserung Charserver Spoiler rAthena Development Team presents ___ __ __ _____/ | / /_/ /_ ___ ____ ____ _ / ___/ /| |/ __/ __ \/ _ \/ __ \/ __ `/ / / / ___ / /_/ / / / __/ / / / /_/ / /_/ /_/ |_\__/_/ /_/\___/_/ /_/\__,_/ http://rathena.org/board/ [Info]: Git Hash: [Warning]: You are running rAthena with admin privileges, it is not necessary. [Info]: Server uses 'select' as event dispatcher [Info]: Server supports up to '4096' concurrent connections. [Status]: Character server IP address : 78.xx.xx.xx -> 78.xx.xx.xx [Status]: Login server IP address : 127.0.0.1 -> 127.0.0.1 [Info]: Done reading conf/import/char_conf.txt. [Info]: Done reading conf/char_athena.conf. [Info]: Done reading conf/import/inter_conf.txt. [Info]: Done reading conf/inter_athena.conf. [Info]: Done reading '149' messages in 'conf/msg_conf/char_msg.conf'. [Info]: Done reading conf/import/inter_conf.txt. [Info]: Done reading conf/inter_athena.conf. [Info]: Connect Character DB server.... (Character Server) [Status]: Done reading '1' storage information in 'conf/inter_server.yml' [Status]: Done reading '0' storage information in 'conf/import/inter_server.yml' [Status]: Done reading '49' entries in 'db/pre-re/exp_guild.txt'. [Status]: Done reading '0' entries in 'db/import/exp_guild.txt'. [Info]: Clan loaded (1 - Swordman Clan) [Info]: Clan loaded (2 - Arcwand Clan) [Info]: Clan loaded (3 - Golden Mace Clan) [Info]: Clan loaded (4 - Crossbow Clan) [Status]: Finished Reading GeoIP Database. [Status]: Characters per Account: '0'. [Info]: Start checking DB integrity [Info]: DB integrity check finished with success [Info]: Default map: 'prontera 156,191' [Status]: The char-server is ready (Server is listening on the port 6121). [Info]: Attempt to connect to login-server... [Status]: Connecting to 127.0.0.1:6900 [Status]: Connected to login-server (connection #2). [Status]: Awaiting maps from map-server. [Status]: Map-Server 0 connected: 919 maps, from IP 78.xx.xx.xx port 5121. [Status]: Map-server 0 loading complete. [Info]: Loaded guild castle (0 - guild 0) [Info]: Loaded guild castle (1 - guild 0) [Info]: Loaded guild castle (2 - guild 0) [Info]: Loaded guild castle (3 - guild 0) [Info]: Loaded guild castle (4 - guild 0) [Info]: Loaded guild castle (5 - guild 0) [Info]: Loaded guild castle (6 - guild 0) [Info]: Loaded guild castle (7 - guild 0) [Info]: Loaded guild castle (8 - guild 0) [Info]: Loaded guild castle (9 - guild 0) [Info]: Loaded guild castle (10 - guild 0) [Info]: Loaded guild castle (11 - guild 0) [Info]: Loaded guild castle (12 - guild 0) [Info]: Loaded guild castle (13 - guild 0) [Info]: Loaded guild castle (14 - guild 0) [Info]: Loaded guild castle (15 - guild 0) [Info]: Loaded guild castle (16 - guild 0) [Info]: Loaded guild castle (17 - guild 0) [Info]: Loaded guild castle (18 - guild 0) [Info]: Loaded guild castle (19 - guild 0) [Info]: Loaded guild castle (20 - guild 0) [Info]: Loaded guild castle (21 - guild 0) [Info]: Loaded guild castle (22 - guild 0) [Info]: Loaded guild castle (23 - guild 0) [Info]: Loaded guild castle (24 - guild 0) [Info]: Loaded guild castle (25 - guild 0) [Info]: Loaded guild castle (26 - guild 0) [Info]: Loaded guild castle (27 - guild 0) [Info]: Loaded guild castle (28 - guild 0) [Info]: Loaded guild castle (29 - guild 0) [Info]: Loaded guild castle (30 - guild 0) [Info]: Loaded guild castle (31 - guild 0) [Info]: Loaded guild castle (32 - guild 0) [Info]: Loaded guild castle (33 - guild 0) [Info]: Loaded guild castle (34 - guild 0) [Info]: Loaded guild castle (35 - guild 0) [Info]: Loaded guild castle (36 - guild 0) [Info]: Loaded guild castle (37 - guild 0) [Info]: Loaded guild castle (38 - guild 0) [Info]: Loaded guild castle (39 - guild 0) [Info]: Loaded guild castle (40 - guild 0) [Info]: Loaded guild castle (41 - guild 0) [Info]: Loaded guild castle (42 - guild 0) [Info]: Loaded guild castle (43 - guild 0) wireshark muss ich noch raffen dann gibt es auch da info ^^ Edited January 4, 2019 by Equi Quote Link to comment Share on other sites More sharing options...
Shyl Posted January 4, 2019 Group: Members Topic Count: 0 Topics Per Day: 0 Content Count: 6 Reputation: 0 Joined: 08/28/14 Last Seen: May 19, 2021 Share Posted January 4, 2019 Ne meine Exe ist Patched, hast du auch neu Compilert? https://rathena.org/board/topic/111830-tutorial-video-edition-how-to-setup-rathena-and-run-ragnarok-updated-2018-7-28/ Hab die Exe aus diesen tut genommen. Quote Link to comment Share on other sites More sharing options...
Equi Posted January 4, 2019 Group: Members Topic Count: 1 Topics Per Day: 0.00 Content Count: 4 Reputation: 0 Joined: 01/03/19 Last Seen: March 8, 2019 Author Share Posted January 4, 2019 (edited) On 1/3/2019 at 2:12 PM, Equi said: Jede Änderung am Server wurde mit MVS17 gemacht also gesäubert und neu erstellt bei jedem Versuch. must have die exe hab ich auch und läuft nicht , eben nochmal genau gemacht wie im Video mit der 13.08.18 kRO und die 20151104, läuft immer noch nicht, nemo4144/2.6 und die diff Auswahl wie am Ende. Hast du PACKET_OBFUSCATION aktiv? Edited January 4, 2019 by Equi Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 4, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 4, 2019 Wenn du packet_obfuscation im Server nicht an hast brauchst du es im Client nicht. Bekommst eig auch immer angezeigt, falls was mit packet_obf nicht stimmt. Quote Link to comment Share on other sites More sharing options...
Equi Posted January 4, 2019 Group: Members Topic Count: 1 Topics Per Day: 0.00 Content Count: 4 Reputation: 0 Joined: 01/03/19 Last Seen: March 8, 2019 Author Share Posted January 4, 2019 (edited) Bei mir ist es an und Client hab ich es auch nicht raus genommen. Server compiling war ja bis jetzt auch ohne Fehler, es muss echt am Client liegen nur keine Ahnung warum. Konnte auch nichts finden das der Rootserver noch Extras brauch ausser Mysql, Github und Ports. Hab mich sogar schon an Sader gewand für seinen Service aber leider keine Antwort von ihm. Edited January 4, 2019 by Equi Quote Link to comment Share on other sites More sharing options...
Normynator Posted January 4, 2019 Group: Developer Topic Count: 7 Topics Per Day: 0.00 Content Count: 292 Reputation: 199 Joined: 05/03/13 Last Seen: May 26, 2023 Share Posted January 4, 2019 Add mich auf discord ich helf dir, dann musst du nix zahlen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.