I know there have been plenty of threads about this topic, have read a couple of them and read plenty of guides but with no luck making my server reachable by my friends.
My server is for testing purposes so I think the least I modify the least chance of getting errors.
Well.. on topic, this is my configuration:
[spoiler=char_athena.conf]
// Login Server IP
// The character server connects to the login server using this IP address.
// NOTE: This is useful when you are running behind a firewall or are on
// a machine with multiple interfaces.
//login_ip: 127.0.0.1
login_ip: LAN IP
// Login Server Port
login_port: 6900
// Character Server IP
// The IP address which clients will use to connect.
// Set this to what your server's public IP address is.
//char_ip: 127.0.0.1
char_ip: WAN IP
// Character Server Port
char_port: 6121
[spoiler=map_athena.conf]
// Character Server IP
// The map server connects to the character server using this IP address.
// NOTE: This is useful when you are running behind a firewall or are on
// a machine with multiple interfaces.
//char_ip: 127.0.0.1
char_ip: LAN IP
// Character Server Port
char_port: 6121
// Map Server IP
// The IP address which clients will use to connect.
// Set this to what your server's public IP address is.
//map_ip: 127.0.0.1
map_ip: WAN IP
// Map Server Port
map_port: 5121
[spoiler=subnet_athena.conf]
// Subnet support file
// Format is:
// subnet: net-submask:char_ip:map_ip
// you can add more than one subnet (max 16)
// check is if((net-submask & char_ip ) == (net-submask & servip)) => ok
//subnet: 255.0.0.0:127.0.0.1:127.0.0.1
subnet: 255.255.255.0:WAN IP:WAN IP
The comments are just to not write on the original line of text.
Success: I can see your service on WAN IP on port (5121)
Success: I can see your service on WAN IP on port (6121)
Success: I can see your service on WAN IP on port (6900)
My friends are getting the 'Failed to Connect to Server' message after waiting like 5 seconds on their executables. My kRO Folder is the same as theirs, since I passed it to them, same .exe, same everything.
Question
Echoes
I know there have been plenty of threads about this topic, have read a couple of them and read plenty of guides but with no luck making my server reachable by my friends.
My server is for testing purposes so I think the least I modify the least chance of getting errors.
Well.. on topic, this is my configuration:
[spoiler=char_athena.conf]
[spoiler=map_athena.conf]
[spoiler=subnet_athena.conf]
The comments are just to not write on the original line of text.
Also port forwarded the range 5121-6900 on TCP.
http://www.canyouseeme.org/results:
Success: I can see your service on WAN IP on port (5121)
Success: I can see your service on WAN IP on port (6121)
Success: I can see your service on WAN IP on port (6900)
My friends are getting the 'Failed to Connect to Server' message after waiting like 5 seconds on their executables. My kRO Folder is the same as theirs, since I passed it to them, same .exe, same everything.
[spoiler=clientinfo.xml]
There is no message on mapserv/charserv/logserv when they try to login.
Hope you guys can help me with this problem c:
Edited by EchoesLink to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.