-
Posts
20 -
Joined
-
Last visited
ihazbackup's Achievements

Poring (1/15)
2
Reputation
-
Hello fellow mappers, this is my first map I made. Because there are so many custom towns and so little fields, I made a large field map. It's a training camp map with 1 entrance to another map and 1 entrance to a dungeon. Training camp also includes a beach scenery. Because this is a field map, I'm planning on adding monsters in my server. Here are the photos: Some textures are quite misplaced and lightmaps aren't proper yet. It was quite hard blending between textures... If it's done, I'm planning on releasing it free, considering my first work haha... Any advice or suggestion is welcomed. Thanks
- 1 reply
-
- 1
-
-
Tried clicking "+", no result... still 1 tile editing.. I looked at the Preference window and saw that the "Increase Brush Size" is set at "Equal" key. I tried clicking equal key, shift+equal, even turning on capslock... still no result. I changed the button to number "0". Still not working either. SOLVED: I don't know what's going on... too many unknown error while executing rathena, clients, adding custom maps, and now, browedit that I didn't care what caused it anyway.. I changed the letter for "Increase Brush Size" to "T" and it works. I also executed BrowEdit as Admin.
-
Hello, I'm currently building a custom map, a field, for my server. It's quite big (almost 200x200) and the problem's the GAT tiling takes too long since I can only change 1 tile at a time. I've tried set "Gat Collision1" and "GatCollision 2" from "Edit" menu, but it's not enough to correctly cover the entire map. There are still a lot of tiles needed to be changed Is there any way to cover a X times X tiles for GAT Tiling?? Or I have to do it one by one tile?? Thanks before
-
Browedit r586: Texture tiling is wrong
ihazbackup replied to ihazbackup's question in Graphics Support
THX a lot, Najara. It fixes the bad tiling. My resolution was set to 1366x768, so it stretched. Well, I'll use BrowEdit r586 with 1280x720 resolution.. THX again -
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
Thank you for the file.. I followed the same step as you do (I got my EXE file from my friend's server. He happens to have the same version 2012-04-10) and it works... I don't even know what happens.. Anyway thx for all the help, Neji. I'll replace the file with the one you gave me later.. -
Hi, I've stumbled across a bug (or not) in BrowEdit r586. When I tile the texture using the red bounding box on the left menu, the displayed texture seems missed 1 tile to the left on the map. Here's the picture: Is it a bug or there are some settings I have not encountered yet?? Any help is appreciated, thanks...
-
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
Yeah, my undiffed Exe file came from the same source. My system has all the updates required.. - already patched kro to the latest - All following the guide from https://rathena.org/board/topic/70962-recommended-client-setup/ Tried - 2012-04-10aRagexe, - 2012-04-10aRagexeRE, - 2012-04-10aRagexeRE_J, - 2012-04-10aRagexeRE_S I even tried the diffed version. Still blank error I don't know if the client works in Win8. You should change compatibility to XP -
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
Hmmm well.. Now, I'm re-doing all the client setup. I deleted the client folder and starts from installing kro client. I'll update when I'm done NOTE: XDiff patcher is useful for 2013 or above clients. I'm using the 2012 client. EDIT : Okay, I've re-done the steps for making the client. I followed this guide: https://rathena.org/board/topic/70962-recommended-client-setup/ Here are the steps: - Installed kro. Downloaded the latest one 2015-03-01 from NickyZai - created "data" folder and copy the data folder downloaded from the guide to my RO folder - Copied the "luafiles514", also downloaded from the same source, to the "data" folder in my RO folder - Changed clientinfo.xml - Created the GRF from the "data" folder I made. - Created DATA.INI and set the path to grf - Diffed client 2012-04-10aRagexeRE_S, downloaded from the guide with the same setting as the above mentioned (No Read LUA before LUB, no Read from Data Folder) - Started the server [sUCCESS] (my server took the maps from client's grf) - Started the client [FAIL].... Still blank error message - If I check disable 1rag1 parameter, it will show windows crash error. I've been stuck in this problem for 5 hours.... -
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
I didn't diff that patch. That patch is not showing in NEMO After I double-clicked the client, the error showed -
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
I already ran it with admin privileges. Still the same error EDIT : after diffing and uncheck Read Data Folder First, I got this error instead: -
Client 20120410aRagexe gives blank error
ihazbackup replied to ihazbackup's question in Client-side Support
Tried diffing with Disable -1rag1 parameter, no blank error, but crashed instead. Here's the screenshot EDIT : I tried with the diffed client from the site https://rathena.org/board/topic/70962-recommended-client-setup/above. Same error -
BrowEdit r620: cannot move objects from object window to Object edit window
ihazbackup replied to ihazbackup's question in Graphics Support
I've tried it and still crashes. Anyway, I fixed it already. I was using the File > New Map feature which seems buggy. I used ro defined map (in this case, gef_tower), selected Tool > Clear maps, started building, and HOORAY I managed to save it.. -
Hi, I'm currently trying to get client 20120410 working on my server. Here's my client information: - 2012-04-10aRagexe diffed using Nemo - Patches included The problem is, it gives blank error whenever I executed my client. Here's the screenshot I used the data, lub files, and client file from this thread: https://rathena.org/board/topic/70962-recommended-client-setup/ I've tried re-doing the grf making, re-diffing, etc.. but it still gives the same error Sorry if this is a noob question. I've just started messing with rathena server and client Any help is appreciated. THX
-
Hi, I'm trying to make a custom map using BrowEdit. I followed the guide from this link: http://browedit.excalibur-nw.com/?a=viewtopic&id=533 The problem shows up when I'm trying to add model in "Object Edit" mode. I presses M, clicking several 3d objects I'm going to use, but the objects did not show up at the Object Edit Window's list (only a line with the word "object"). I can't add any object, nor placing it.. I'm sorry if it's a noob question, as I am a scripter and still learning about BrowEdit... Thanks before.. EDIT: I've changed to version 586 (most people seem to use this version, and they said this version is the least buggy version.). Still cannot choose object to the list.. SOLVED: The right window is actually a window for placed objects. To place an object, select 1 from Object window, close the window, and Ctrl+Click on the map to place it... It's solved now.. -------------------- New Problem ----------------------- Guys, I have another problem. My BrowEdit r586 hangs when saving maps. I cannot save any maps cause it kept crashing... Tried compatibility check with windows XP, same problem..
-
Item description is not korean, but looks gibberish
ihazbackup posted a question in Client-side Support
Hi, I need help with my client. I'm running a 2012-04-10a client and so far it works perfectly, both client and server. All, except the the item description in the client side. It's not in Korean or symbols, but it's like a collection of jumbled words (not even had any meaning in different languages). Here's the screenshot I've already checked the : - data/msgstringtable.txt -> all in english - num2itemdesctable.txt -> all in english - num2itemdisplaynametable.txt -> english - num2itemresnametable.txt -> also english LUA and LUB is also translated Any help is appreciated. THX before