Aeterna08

thank you. this worked!

i dont think so. but if ever that is true, isnt that supposed to affect the admin account? the admin account keeps it buffs after logout So i tried to disable all custom scripts, npcs, etc. Turns out when I use awakening potions, battle manuals, etc., I can retain all the buffs/status even after relog. But when i get a buff like bless/agi (even from normal players), I lose all buffs after relog. please help me ?

I made an extreme buffer NPC (with 50M zeny cost per buff) but whenever I change character, all buffs are gone. Same issue with using battle manual, gone automatically -- not happening when using an admin account. I wonder if it has something to do with the duration of the buffs and battle manual as I set them to 24 hours. Edit: I already tried editing status.conf but same issue. //-------------------------------------------------------------- // rAthena Battle Configuration File // Originally Translated by Peter Kieser <[email protected]> // Made in to plainer English by Ancyker //-------------------------------------------------------------- // Note 1: Value is a config switch (on/off, yes/no or 1/0) // Note 2: Value is in percents (100 means 100%) // Note 3: Value is a bit field. If no description is given, // assume unit types (1: Pc, 2: Mob, 4: Pet, 8: Homun, 16: Mercenary, 128: NPC, 512: Elemental) //-------------------------------------------------------------- // Should skill casting be cancelled when inflicted by curse/stun/sleep/etc (includes silence) (Note 3)? status_cast_cancel: 0 // Will certain skill status-changes be removed on logout? // This mimics official servers, where Extremity Fist's no SP regen, // Strip Equipment, and some other buffs are removed when you logout. Setting is: // 0 = remove nothing. // 1 = remove negative buffs (stripping, EF) // 2 = remove positive buffs (maximize power, steel body...) // 3 = remove both negative and positive buffs. debuff_on_logout: 0 // Adjustment for the natural rate of resistance from status changes. // If 50, status defense is halved, and you need twice as much stats to block // them (eg: 200 vit to completely block stun) pc_status_def_rate: 100 mob_status_def_rate: 100 // Maximum resistance to status changes. (100 = 100%) // NOTE: Cards and equipment can go over this limit, so it only applies to natural resist. pc_max_status_def: 100 mob_max_status_def: 100

For char_athena.conf, I only used my LAN IP on char_ip and retained 127.0.0.1 on login_ip. For map_athena.conf, I used LAN IP on map_ip and retained 127.0.0.1 on char_ip. Should I change everything to LAN IP? The other PC uses clientinfo.xml or sclientinfo.xml with my LAN IP and getting rejected. I'm just confused as to when my client (on this PC) uses sclientinfo.xml, it's getting rejected from the server as well. But it works fine if I delete the sclientinfo.xml. EDIT: Issue resolved. I removed <passwordencrypt /> <passwordencrypt2 /> from clientinfo.xml and sclientinfo.xml. Thanks!

Need help with playing thru LAN. The other PC is getting "Rejected by server(3)" when trying to login. I can see the attempt on my PC: I already port forwarded 6900, 6121, and 5121. The other PC's sclientinfo.xml is using my IP address from ipconfig and already set my PC to static IP. char_athena.conf: // Athena Character configuration file. // Note: "Comments" are all text on the right side of a double slash "//" // Whatever text is commented will not be parsed by the servers, and serves // only as information/reference. // Server Communication username and password. userid: s1 passwd: p1 // Server name, use alternative character such as ASCII 160 for spaces. // NOTE: Do not use spaces or any of these characters which are not allowed in // Windows filenames \/:*?"<>| // ... or else guild emblems won't work client-side! server_name: rAthena // Wisp name for server: used to send wisp from server to players (between 4 to 23 characters) wisp_server_name: Server // Login Server IP // The character server connects to the login server using this IP address. // NOTE: This is useful when you are running behind a firewall or are on // a machine with multiple interfaces. login_ip: 127.0.0.1 // The character server listens on the interface with this IP address. // NOTE: This allows you to run multiple servers on multiple interfaces // while using the same ports for each server. //bind_ip: 127.0.0.1 // Login Server Port login_port: 6900 // Character Server IP // The IP address which clients will use to connect. // Set this to what your server's public IP address is. char_ip: <my PC's IP from ipconfig> // Character Server Port char_port: 6121 //Time-stamp format which will be printed before all messages. //Can at most be 20 characters long. //Common formats: // %I:%M:%S %p (hour:minute:second 12 hour, AM/PM format) // %H:%M:%S (hour:minute:second, 24 hour format) // %d/%b/%Y (day/Month/year) //For full format information, consult the strftime() manual. //timestamp_format: [%d/%b %H:%M] //If redirected output contains escape sequences (color codes) stdout_with_ansisequence: no //Makes server log selected message types to a file in the /log/ folder //1: Log Warning Messages //2: Log Error and SQL Error messages. //4: Log Debug Messages //Example: "console_msg_log: 7" logs all 3 kinds //Messages logged by this overrides console_silent setting console_msg_log: 0 // File path to store the console messages above console_log_filepath: ./log/char-msg_log.log //Makes server output more silent by ommitting certain types of messages: //1: Hide Information messages //2: Hide Status messages //4: Hide Notice Messages //8: Hide Warning Messages //16: Hide Error and SQL Error messages. //32: Hide Debug Messages //Example: "console_silent: 7" Hides information, status and notice messages (1+2+4) console_silent: 0 // Console Commands // Allow for console commands to be used on/off // This prevents usage of >& log.file console: off // Type of server. // No functional side effects at the moment. // Displayed next to the server name in the client. // 0=normal, 1=maintenance, 2=over 18, 3=paying, 4=P2P char_maintenance: 0 // Enable or disable creation of new characters. // Now it is actually supported [Kevin] char_new: yes // Display (New) in the server list. char_new_display: 0 // Maximum users able to connect to the server. // Set to 0 to disable users to log-in. (-1 means unlimited) max_connect_user: -1 // Group ID that is allowed to bypass the server limit of users. // Or to connect when the char is in maintenance mode (groupid >= allow) // Default: -1 = nobody (there are no groups with ID < 0) // See: conf/groups.conf gm_allow_group: 99 // How often should the server save guild infos? (In seconds) // (character save interval is defined on the map config (autosave_time)) autosave_time: 60 // Display information on the console whenever characters/guilds/parties/pets are loaded/saved? save_log: yes // Starting point for new characters // Format: <map_name>,<x>,<y>{:<map_name>,<x>,<y>...} // Max number of start points is MAX_STARTPOINT in char.hpp (default 5) // Location is randomly picked on character creation. // NOTE: For Doram, this requires client 20151001 or newer. start_point: iz_int,18,26:iz_int01,18,26:iz_int02,18,26:iz_int03,18,26:iz_int04,18,26 start_point_pre: new_1-1,53,111:new_2-1,53,111:new_3-1,53,111:new_4-1,53,111:new_5-1,53,111 start_point_doram: lasa_fild01,48,297 // Starting items for new characters // Max number of items is MAX_STARTITEM in char.cpp (default 32) // Format: <id>,<amount>,<position>{:<id>,<amount>,<position>...} // To auto-equip an item, include the position where it will be equipped; otherwise, use zero. // NOTE: For Doram, this requires client 20151001 or newer. start_items: 1201,1,2:2301,1,16 start_items_doram: 1681,1,2:2301,1,16 // Starting zeny for new characters start_zeny: 0 // Size for the fame-lists fame_list_alchemist: 10 fame_list_blacksmith: 10 fame_list_taekwon: 10 // Guild earned exp modifier. // Adjusts taxed exp before adding it to the guild's exp. For example, if set // to 200, the guild receives double the player's taxed exp. guild_exp_rate: 100 // Name used for unknown characters unknown_char_name: Unknown // To log the character server? log_char: yes // Allow or not identical name for characters but with a different case (upper/lower): // example: Test-test-TEST-TesT; Value: 0 not allowed (default), 1 allowed name_ignoring_case: no // Manage possible letters/symbol in the name of charater. Control character (0x00-0x1f) are never accepted. Possible values are: // NOTE: Applies to character, party and guild names. // 0: no restriction (default) // 1: only letters/symbols in 'char_name_letters' option. // 2: Letters/symbols in 'char_name_letters' option are forbidden. All others are possibles. char_name_option: 1 // Set the letters/symbols that you want use with the 'char_name_option' option. // Note: Don't add spaces unless you mean to add 'space' to the list. char_name_letters: abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 // Restrict character deletion by BaseLevel // 0: no restriction (players can delete characters of any level) // -X: you can't delete chars with BaseLevel <= X // Y: you can't delete chars with BaseLevel >= Y // e.g. char_del_level: 80 (players can't delete characters with 80+ BaseLevel) char_del_level: 0 // Amount of time in seconds by which the character deletion is delayed. // Default: 86400 (24 hours) // NOTE: Requires client 2010-08-03aragexeRE or newer. char_del_delay: 86400 // Restrict character deletion by email address or birthdate. // This restricts players from changing the langtype and deleting characters. // Defaults based on client date. // 1: Email address // 2: Birthdate // 3: Email address or Birthdate // IMPORTANT! // - This config only works for clients that send 0x0068 or 0x01fb for delete request. // - Use langtype 1 for newer clients (2013+), to use 0x01fb. // - Clients that are not using 0x0068 or 0x01fb, only use birthdate (YYMMDD) as default. char_del_option: 2 // Restrict character deletion as long as he is still in a party or guild // 0: No restriction is applied // 1: Character cannot be deleted as long as he remains in a party // 2: Character cannot be deleted as long as he remains in a guild // 3: Character cannot be deleted as long as he remains in a party or guild(default) char_del_restriction: 3 // Restrict certain class from being created. (Only functional on 20151001aRagexe or later) // 0: No character creation is allowed // 1: Only novice is allowed to be created (pre-renewal default) // 2: Only summoner is allowed to be created // 3: Both novice and summoner can be created (renewal default) // Uncomment to customize the restriction //allowed_job_flag: 3 // Folder that contains the database files. db_path: db //=================================== // Pincode system //=================================== // NOTE: Requires client 2011-03-09aragexeRE or newer. // A window is opened before you can select your character and you will have to enter a pincode by using only your mouse. // Default: yes pincode_enabled: yes // How often does a user have to change his pincode? // 0: never (default) // X: every X days pincode_changetime: 0 // How often can a user enter the wrong pincode? // Default: 3 (client maximum) pincode_maxtry: 3 // Are users forced to use a pincode when the system is enabled? // Default: yes pincode_force: yes // Are repeated numbers allowed? // Default: no pincode_allow_repeated: no // Are sequential numbers allowed? // Default: no pincode_allow_sequential: no //=================================== // Addon system //=================================== // Character moving // NOTE: Requires client 2011-09-28aragexeRE or newer. // Allows users to move their characters between slots. // Default: yes char_move_enabled: yes // Allow users to move a character to a used slot? // If enabled the characters are exchanged. // Default: yes char_movetoused: yes // Allow users to move characters as often as they like? char_moves_unlimited: no // Character renaming // Allow users to rename a character while being in a party? // Default: no char_rename_party: no // Allow users to rename a character while being in a guild? // Default: no char_rename_guild: no // Should we check if sql-tables are correct on server startup ? char_checkdb: yes // Default map if character is in not-existing map when loaded. default_map: prontera default_map_x: 156 default_map_y: 191 // After how many days should inactive clan members be removed from their clan? // 0: never remove them // X: remove clan members if they did not log in for X days // Default: 14 clan_remove_inactive_days: 14 //=================================== // RODEX //=================================== // After how many days should mails be returned to their sender? // 0: never return them // X: return them after X days // Default: 15 mail_return_days: 15 // How many days after a mail was returned to it's sender should it be deleted completely? // 0: never delete them // X: delete them X days after they were returned // Default: 15 mail_delete_days: 15 // Does the Retrieve All button ignore unread mail status? // no: Only return attachments from read mail // yes: Return attachments from all mail // Default: yes mail_retrieve: yes // Should mails without any attachments be returned to their sender? // Default: yes mail_return_empty: yes import: conf/import/char_conf.txt map_athena.conf //-------------------------------------------------------------- //rAthena Map-Server Configuration File //-------------------------------------------------------------- // Note: "Comments" are all text on the right side of a double slash "//" // Whatever text is commented will not be parsed by the servers, and serves // only as information/reference. //-------------------------------------------------------------- // Configuration Info //-------------------------------------------------------------- // Interserver communication passwords, set in account.txt (or equiv.) userid: s1 passwd: p1 // Character Server IP // The map server connects to the character server using this IP address. // NOTE: This is useful when you are running behind a firewall or are on // a machine with multiple interfaces. char_ip: 127.0.0.1 // The map server listens on the interface with this IP address. // NOTE: This allows you to run multiple servers on multiple interfaces // while using the same ports for each server. //bind_ip: 127.0.0.1 // Character Server Port char_port: 6121 // Map Server IP // The IP address which clients will use to connect. // Set this to what your server's public IP address is. map_ip: <my PC's IP from ipconfig> // Map Server Port map_port: 5121 //Time-stamp format which will be printed before all messages. //Can at most be 20 characters long. //Common formats: // %I:%M:%S %p (hour:minute:second 12 hour, AM/PM format) // %H:%M:%S (hour:minute:second, 24 hour format) // %d/%b/%Y (day/Month/year) //For full format information, consult the strftime() manual. //timestamp_format: [%d/%b %H:%M] //If redirected output contains escape sequences (color codes) stdout_with_ansisequence: no //Makes server log selected message types to a file in the /log/ folder //1: Log Warning Messages //2: Log Error and SQL Error messages. //4: Log Debug Messages //Example: "console_msg_log: 7" logs all 3 kinds //Messages logged by this overrides console_silent setting console_msg_log: 0 // File path to store the console messages above console_log_filepath: ./log/map-msg_log.log //Makes server output more silent by omitting certain types of messages: //1: Hide Information messages //2: Hide Status messages //4: Hide Notice Messages //8: Hide Warning Messages //16: Hide Error and SQL Error messages. //32: Hide Debug Messages //Example: "console_silent: 7" Hides information, status and notice messages (1+2+4) console_silent: 0 //Where should all database data be read from? db_path: db // Enable the @guildspy and @partyspy at commands? // Note that enabling them decreases packet sending performance. enable_spy: no // Read map data from GATs and RSWs in GRF files or a data directory // as referenced by grf-files.txt rather than from the mapcache? use_grf: no // Console Commands // Allow for console commands to be used on/off // This prevents usage of >& log.file console: off // Database autosave time // All characters are saved on this time in seconds (example: // autosave of 60 secs with 60 characters online -> one char is saved every // second) autosave_time: 300 // Min database save intervals (in ms) // Prevent saving characters faster than at this rate (prevents char-server // save-load getting too high as character-count increases) minsave_time: 100 // Apart from the autosave_time, players will also get saved when involved // in the following (add as needed): // 1: after every successful trade // 2: after opening vending/every vending transaction // 4: after closing storage/guild storage. // 8: After hatching/returning to egg a pet. // 16: After successfully sending a mail with attachment // 32: After successfully submitting an item for auction // 64: After successfully get/delete/complete a quest // 128: After every bank transaction (deposit/withdraw) // 256: After every attendance reward // 4095: Always // NOTE: These settings decrease the chance of dupes/lost items when there's a // server crash at the expense of increasing the map/char server lag. If your // server rarely crashes, but experiences interserver lag, you may want to set // these off. save_settings: 4095 // Message of the day file, when a character logs on, this message is displayed. motd_txt: conf/motd.txt // When @help or @h is typed when you are a gm, this is displayed for helping new gms understand gm commands. charhelp_txt: conf/charhelp.txt // Load channel config from channel_conf: conf/channels.conf // Maps: import: conf/maps_athena.conf import: conf/import/map_conf.txt subnet_athena.conf // Subnet support file // Format is: // subnet: net-submask:char_ip:map_ip // you can add more than one subnet (max 16) // check is if((net-submask & char_ip ) == (net-submask & servip)) => ok subnet: 255.0.0.0:127.0.0.1:127.0.0.1 Please help! Thank you so much!