gigabytes

+10 keep it up!

search and read is the best way to reach your goal

if you can't host your server on your own computer, you need a VPS. computer din sya, 24/7 online yan.

check your internet setting on modem. If BRIDGE set, you need to make it to ROUTING TYPE.

You're problem is in your modem. 98% PLDT modem yan right? check your internet connection on your modem. dapat naka ROUTING type yan. if naka BRIDGE yan, ndi gagana yang port forwarding. you need a router for port forwarding again. 99% tested, PLDT user din ako before. if naka bridge nga talaga yan, just search on google how to set your modem from bridge to routing type

I will share some simple guide to check if you are connected 100% 1st step is: set all your config to localhost (127.0.0.1) [char_athena, inter_athena, map_athena] pag naka localhost lahat, no need to port forwarding muna. pati sa clientinfo.xml dapat 127.0.0.1 pag connected ka at walang error sa server side mo, means 100% config mo. 2nd step. if you think you are ready to public your server. set all 127.0.0.1 to your WAN IP (www.whatismyip.com) after mo i set lahat, you need port forwarding na. you need to open your port of your login, character, and map. login = 6900 char = 6121 map = 5121 you need to open that port para maka connect ang ibang client mo. share ko setting ng port forwarding ng router. para may idea ka. pasensya na sa language, korean sya. nasa korea kasi server ko 192.168.2.100 = my LAN IP you need to open the port of your lan ip 192.168.2.100:6900 192.168.2.100:6121 192.168.2.100:5121

same as globe. sometime my WAN IP not match on whatismyip and on my router. best solution for here is, use NAT connection. try to use VMware then NAT connection. but you need to setup some port forwarding on it. try it.